What steps ensure safe rigid tapping at high speeds?

Rigid tapping demands synchronization-spindle encoder feedback must be spot-on. Start with conservative pitch feed: 90% of spec, then ramp up. Use tension/compression holders initially if your control allows floating. Coolant through tool helps chip evacuation in blind holes. Peck tap if chips pack. Monitor torque-spikes mean dull tap or misalignment. The TMC-800L's high-rpm direct drive excels at fast rigid cycles, reversing smoothly without dwell. Its BT30 taper grips taps securely. Always test on scrap first, and back off peck depth if threads tear.