TMC-800L CNC Drilling and Tapping Machining Center
We designed the TMC-800L CNC Drilling and Tapping Machining Center to handle large-surface-area workpieces that require high-speed drilling and tapping without sacrificing spatial precision. Built on a heavy casting base that is naturally aged and finished entirely in-house, this machine is perfect for multi-fixture configurations and large aluminum housings. By integrating advanced drive components and high-speed linear guideways, the TMC-800L CNC Drilling and Tapping Machining Center achieves a rapid feed rate of 48 m/min across all three axes. This enables dramatic cycle-time reductions in industries like 5G telecom and automotive electronics, where high hole-counts often inflate production times.
Every unit undergoes a comprehensive quality check before shipment, including continuous test runs, ball-bar tests, and a final Renishaw laser calibration. Our dedication to machine quality is matched by our responsive after-sales support; we have a team of service engineers with over 10 years of experience ready to assist with remote programming, installation guidance, and troubleshooting. Whether you are setting up a new production line or upgrading an existing workshop, we support standard payment structures (30% deposit via T/T and 70% before delivery) and provide detailed, transparent drawings for foundation preparation and electrical requirements.
Technical Specifications
|
Item |
Unit |
TMC-800L |
|
X/Y/Z Axis Travel |
mm |
800 / 500 / 330 |
|
Worktable Area |
mm |
1000 × 500 |
|
Worktable Load Capacity |
kg |
350 |
|
Distance from Spindle Nose to Worktable |
mm |
150 – 480 |
|
Positioning Accuracy |
mm |
0.01 |
|
Repeat Positioning Accuracy |
mm |
±0.003 |
|
Maximum Spindle Speed |
rpm |
Direct Drive 20000 |
|
Spindle Taper |
– |
BT30 |
|
Spindle Motor Power |
kW |
3.7 – 5.5 |
|
3-Axis Motor Power |
kW |
1.5 / 1.5 / 3.0 |
|
3-Axis Rapid Traverse Speed |
m/min |
48 / 48 / 48 |
|
3-Axis Cutting Feed Rate |
mm/min |
1 – 10000 |
|
ATC Tool Specification |
– |
BT30 |
|
Tool Magazine Type & Capacity |
pcs |
Servo 21T |
|
Tool Change Time |
s |
1.8 |
|
Air Pressure Requirement |
kg/cm² |
6 – 6.5 |
|
Required Power Capacity |
kVA |
15 |
|
Machine Overall Dimension (Length×Width) |
mm |
2200 × 1970 |
|
Machine Height |
mm |
2300 |
|
Machine Weight (Approx.) |
kg |
3200 |
Application Areas
Large Telecom Cavity Filters
Rapid machining of multi-cavity 5G base station filters, antenna housings, and power splitter frames.
Consumer Electronics
Processing of tablet chassis, laptop display backplates, and multi-cavity electronic enclosures.
Automotive Sub-assemblies
Batch drilling and tapping of large chassis brackets, cooling plates, and powertrain sub-frames.
Quality Control Standards
Our metrology department runs a strict quality program. All castings are subjected to stress-relief procedures before processing. We utilize state-of-the-art coordinate measuring machines (CMM) and laser interferometers to verify geometric tolerance compliance. Each assembly stage is thoroughly documented, ensuring complete traceability.
FAQ
Honor and qualification
Utility Model Patent Certificate
Utility Model Patent Certificate
Utility Model Patent Certificate
Utility Model Patent Certificate
Utility Model Patent Certificate
Hot Tags: tmc-800l cnc drilling and tapping machining center, China tmc-800l cnc drilling and tapping machining center manufacturers, suppliers, factory, CNC Drilling Tapping Center, cnc drilling tapping machine, Drilling Tapping Machine Center, Fast Cycle Time Drilling Machine, High Precision Drilling Tapping Center, High Speed Drilling Tapping Center
