CNC Vertical Machining Centre VMC-1690LH

The VMC-1690LH is an extra-large cnc vertical machining centre built around an eight-slider worktable and a reinforced, widened four-linear-guide base. The herringbone column and hard-rail spindle box raise the heavy-cutting load limit, so the machine stays geometrically square when the table carries oversized steel castings.
Send Inquiry
Description
 
 
CNC Vertical Machining Centre VMC-1690LH
vmc cnc 1
01.

The VMC-1690LH is an extra-large cnc vertical machining centre built around an eight-slider worktable and a reinforced, widened four-linear-guide base. The herringbone column and hard-rail spindle box raise the heavy-cutting load limit, so the machine stays geometrically square when the table carries oversized steel castings. HT300 castings receive double aging, and an 18.5 kW BT50 spindle delivers high-feed roughing torque across 1600/900/800 mm travels. High-speed silent ball screws are precision ground, and a nitrogen counterbalance keeps the Z axis balanced. X/Y/Z rapid traverse is tuned to 20/20/15 m/min for heavy inertia rather than sprint speed, and the 24-tool disc magazine changes tools in 3.75 seconds. The 1800 x 900 mm table supports 1600 kg, which makes this cnc vertical machining centre suited to extra-large mold bases, military structural blocks and automotive castings that should be completed in one setup rather than split across several machines. The 1800 x 900 mm table is sized to carry large mold blocks in a single hold, which is why this model is specified by shops that would otherwise need to rotate a 2-ton casting between two smaller VMCs.

02.

Large-part buyers rarely fit a standard table. Because Ningbo Jinkai controls design, mechanical machining, sheet-metal fabrication and full assembly under one ERP-managed roof, we can take a customer drawing and modify the VMC-1690LH's table, stroke, guarding, chip conveyor interface and automation integration before the machine leaves the floor. Non-standard structural changes are evaluated by our technical department, designed, and quoted against a customization contract. Strong material reserves also let us ship standard configurations quickly, so a buyer with a specific oversized workpiece receives a machine tailored to it rather than a standard model adapted after delivery. Because we control the sheet-metal and assembly steps in-house, custom guarding and chip-conveyor interfaces are quoted as one engineering change rather than a three-vendor negotiation.

vmc cnc 2

 

Specifications

 

 

Item

Unit

Value

X/Y/Z Axis Travel

mm

1600/900/800

Worktable Area

mm

1,800 x 900

Worktable Load Capacity

kg

1600

Distance from Spindle Nose to Worktable

mm

220-1020

Positioning Accuracy

mm

0.01

Repeat Positioning Accuracy

mm

±0.003

Maximum Spindle Speed

rpm

Timing Belt 6000

Spindle Taper

-

BT50

Spindle Motor Power

kw

18.5

3-Axis Motor Power

kw

4.5/4.5/4.5

3-Axis Rapid Traverse Speed

m/min

20/20/15

3-Axis Cutting Feed Rate

mm/min

1-10000

ATC Tool Specification

-

BT50

Tool Magazine Type & Capacity

pcs

disc type 24T

Tool Change Time

s

3.75

Air Pressure Requirement

kg/cm²

6-6.5

Required Power Capacity

kva

45

Counterweight System

-

Nitrogen Counterbalance System

Machine Overall Dimension (Length x Width)

mm

4,600 x 2600

Machine Height

mm

3300

Machine Weight (Approx.)

kg

15000

 

Applications

 

Extra-large mold bases and stamping dies

The 1800 x 900 mm table and eight-slider layout support large face-mill work, keeping mold cavities flat and square in fewer setups.

Military and defense structural blocks

The rigid column and 18.5 kW spindle maintain tolerance on heavy alloy steel and armored castings.

Automotive large castings

One-setup milling of oversized engine blocks and transmission housings reduces multi-fixture handling and alignment loss.

 

Customization

 

 

Working envelope, table T-slot pattern, spindle nose and guarding can be modified against customer drawings; CNC controller and automation interface (robot loader, conveyor) are configurable. Non-standard structural changes are quoted under a signed customization contract.

 

Packaging & Transportation

 

 

Packaging details are confirmed per order based on machine dimensions and shipping method.

 

FAQ

 

 

Q: Can you manufacture based on our designs?

A: Yes, we can undertake customer designs based on a mutually signed cooperation agreement.

Q: Is customization available? What about quantity and cost?

A: Non-standard customization is available. Our technical department will evaluate feasibility, design, and production cycles. Quantity and costs are determined through mutual negotiation and finalized in a customization contract.

Q: What are the format and size requirements for customized technical drawings?

A: We typically accept standard engineering formats such as DXF, DWG (2D), and STEP, IGS, or X_T (3D). Detailed specifications can be confirmed during technical docking.

 

product-1280-960

 

Honor and qualification
 
 
8ZL2024111405611

Invention Patent Certificate

9ZL 2023 1 13142194

Invention Patent Certificate

11ZL2017 2 16070681

Utility Model Patent Certificate

12ZL2017 2 17142901

Utility Model Patent Certificate

13ZL2017 2 17120245

Utility Model Patent Certificate

 

Hot Tags: cnc vertical machining centre vmc-1690lh, China cnc vertical machining centre vmc-1690lh manufacturers, suppliers, factory, Heavy Duty VMC, Linear Guide VMC, machining center, Multifunctional Vertical CNC Machine, Precision VMC, Vertical Turning Center